Dell EMC OpenManage SNMP Reference Guide Version 9.1

PDF

Enclosure Table

The following tables describe theavailable properties for each enclosure on the managed system.

The following object sets up the Enclosure Table.

Table 1. Enclosure Table. The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureTable`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3
Description	Defines the enclosure table.
Syntax	SEQUENCE OF EnclosureEntry
Access	Not accessible

Table 2. Enclosure Entry. The following table describes the name, object ID, description, syntax, access level, and index.
Name	`enclosureEntry`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1
Description	Defines the enclosure table entry.
Syntax	EnclosureEntry
Access	Not accessible
Index	`enclosureNumber`

Table 3. Enclosure Number. The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.1
Description	Identifies the instance number of the enclosure entry.
Syntax	Integer
Access	Read-only

Table 4. Enclosure Name. The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.2
Description	Identifies the enclosure's name as represented in Storage Management.
Syntax	DisplayString
Access	Read-only

Table 5. Enclosure Vendor. The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureVendor`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.3
Description	Identifies the enclosure's (re)seller's name.
Syntax	DisplayString
Access	Read-only

Table 6. Enclosure State. The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureState`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.4
Description	The current condition of the enclosure (which includes any devices connected to it.) Possible values: 0: Unknown 1: Ready 2: Failed 3: Online 4: Offline 6: Degraded
Syntax	Integer
Access	Read-only

Table 7. Enclosure Severity. The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureSeverity`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.5
Description	This entry is obsolete for Storage Management. It was replaced with RollUpStatus and ComponentStatus for each device.
Syntax	Integer
Access	Read-only

Table 8. Enclosure ID. The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.6
Description	Represents unique id for an enclosure.
Syntax	DisplayString
Access	Read-only

Table 9. Enclosure Processor Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureProcessorVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.7
Description	This entry is obsolete for Storage Management.
Syntax	DisplayString
Access	Read-only

Table 10. Enclosure Service Tag . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureServiceTag`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.8
Description	The enclosure identification used when consulting customer support.
Syntax	DisplayString
Access	Read-only

Table 11. Enclosure Asset Tag . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureAssetTag`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.9
Description	Customer definable asset tag for the enclosure.
Syntax	DisplayString
Access	Read-only

Table 12. Enclosure Asset Name . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureAssetName`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.10
Description	Customer definable asset name of the enclosure.
Syntax	DisplayString
Access	Read-only

Table 13. Enclosure Split Bus Part Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureSplitBusPartNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.11
Description	Identifies the enclosure's split bus part number.
Syntax	DisplayString
Access	Read-only

Table 14. Enclosure Product ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureProductID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.12
Description	Identifies the enclosure's product identification. This also corresponds to the enclosure type.
Syntax	DisplayString
Access	Read-only

Table 15. Enclosure Kernel Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureKernelVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.13
Description	This entry is obsolete for Storage Management.
Syntax	DisplayString
Access	Read-only

Table 16. Enclosure ESM1 Part Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureESM1PartNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.14
Description	This entry is obsolete for Storage Management.
Syntax	DisplayString
Access	Read-only

Table 17. Enclosure ESM2 Part Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureESM2PartNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.15
Description	This entry is obsolete for Storage Management.
Syntax	DisplayString
Access	Read-only

Table 18. Enclosure Type. The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureType`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.16
Description	Indicates the type of the enclosure. Possible values: 1: Internal 2: Dell PowerVault 200S (PowerVault 201S) 3: Dell PowerVault 210S (PowerVault 211S) 4: Dell PowerVault 220S (PowerVault 221S) 5: Dell PowerVault 660F 6: Dell PowerVault 224F 7: Dell PowerVault 660F/PowerVault 224F 8: Dell MD1000 9: Dell MD1120
Syntax	DisplayString
Access	Read-only

Table 19. Enclosure Processor2 Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureProcessor2Version`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.17
Description	This entry is obsolete for Storage Management.
Syntax	DisplayString
Access	Read-only

Table 20. Enclosure Configuration. The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureConfig`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.18
Description	Identifies the current configuration of the enclosure's backplane. Possible values: 1: Joined 2: Split Bus 3: Clustered 4: Unified
Syntax	Integer
Access	Read-only

Table 21. Enclosure Channel Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureChannelNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.19
Description	Identifies the channel number, or bus, to which the enclosure is connected.
Syntax	Integer
Access	Read-only

Table 22. Enclosure Alarm. The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureAlarm`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.20
Description	Identifies the current status of the enclosure's alarm (PowerVault 220S and PowerVault 221S only.) Possible values: 1: Disabled 2: Enabled
Syntax	Integer
Access	Read-only

Table 23. Enclosure Backplane Part Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureBackplanePartNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.21
Description	Identifies the part number of the enclosure's backplane.
Syntax	Integer
Access	Read-only

Table 24. Enclosure SCSI ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureSCSIID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.22
Description	Identifies the SCSI ID of the controller to which this enclosure is attached.
Syntax	Integer
Access	Read-only

Table 25. Enclosure Roll-Up Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureRollUpStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.23
Description	Identifies the severity of the enclosure state. This is the combined status of the enclosure and its components. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 26. Enclosure Component Status . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureComponentStatus`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.24
Description	The status of the enclosure itself without the propagation of any contained component status. Possible values: 1: Other 2: Unknown 3: OK 4: Non-critical 5: Critical 6: Non-recoverable
Syntax	DellStatus
Access	Read-only

Table 27. Enclosure Nexus ID . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureNexusID`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.25
Description	Durable unique ID for this enclosure.
Syntax	Integer
Access	Read-only

Table 28. Enclosure FirmWare Version . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureFirmwareVersion`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.26
Description	The firmware version of the enclosure.
Syntax	DisplayString
Access	Read-only

Table 29. Enclosure SCSI Rate . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureSCSIRate`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.27
Description	Actual SCSI rate in the enclosure.
Syntax	DisplayString
Access	Read-only

Table 30. Enclosure Part Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosurePartNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.28
Description	The part number of the enclosure.
Syntax	DisplayString
Access	Read-only

Table 31. Enclosure Serial Number . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureSerialNumber`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.29
Description	Serial number of the enclosure.
Syntax	DisplayString
Access	Read-only

Table 32. Enclosure SAS Address . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureSASAddress`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.30
Description	The specified SAS address if this is a SAS enclosure.
Syntax	DisplayString
Access	Read-only

Table 33. Enclosure Occupied Slot Count . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureOccupiedSlotCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.31
Description	Shows the number of physical disk slots occupied in a storage enclosure. NOTE: A value of 9999 indicates that the feature is not available.
Syntax	Integer
Access	Read-only

Table 34. Enclosure Total Slots . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureTotalSlots`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.32
Description	Shows the total number of physical slots in a storage enclosure; it includes total count of occupied and empty slots. NOTE: A value of 9999 indicates that the feature is not available.
Syntax	Integer
Access	Read-only

Table 35. Enclosure Empty Slot Count . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureEmptySlotCount`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.33
Description	Shows the number of empty physical disk slots in a storage enclosure. NOTE: A value of 9999 indicates that the feature is not available
Syntax	Integer
Access	Read-only

Table 36. Enclosure Express Service Code . The following table describes the name, object ID, description, syntax, and access level.
Name	`enclosureExpressServiceCode`
Object ID	1.3.6.1.4.1.674.10893.1.20.130.3.1.34
Description	Express Service Code (ESC) is base 10 converted numerical value of service tag.
Syntax	DisplayString
Access	Read-only